hafele WT 400 Manual De Instrucciones página 94

7. Commissioning
Dialock software 2.0 is required for commissioning and configuring the wall terminal
sets.
Installation and commissioning of the Dialock software is carried out exclusively by
a Dialock technician.
For further information on commissioning and configuration of the entire system, please refer
to the Dialock 2.0 software manual:
8. Operation
The creation and key administration of access points, persons and areas as well as
the setting of the access conditions takes place in Dialock software 2.0.
software manual.
As soon as a reader is in operation, the LED indicator permanently lights up in red.
If an authorised user key is presented, the LED display switches to green for the open
time set in Dialock software 2.0. Access is granted.
The WRU 410 is not shown. The sequences are identical to the WRU 400.
94
https://www.haefele.de/de/produkt/dialock-software-generation-2-sw-200-
control-sw-300-hotel-oder-sw-400-professional/000000230002c11000030023

Dialock 2.0