Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: If the hour format is set to
display sequence is reversed.
5. The hour flashes on the LCD Display. Set the
hour with the M1/M2 Buttons and press the
START/STOP Button to confirm.
6. The minutes flash on the LCD Display. Set the minutes
with the M1/M2 Buttons and press the START/STOP
Button to confirm.
7. The Bluetooth icon flashes on the LCD Display. Use the
M1/M2 Buttons to select (Bluetooth icon appears in the
LCD Display) or deselect (Bluetooth icon disappears from
the LCD Display) automatic Bluetooth data transfer. Note
that Bluetooth transfers may impact battery life. See the
"Bluetooth Setup" subsection below for details. Press the
START/STOP Button to confirm.
8. The User Number icon flashes on the LCD Display. Select
a User Number (U1 or U2) with the M1/M2 Buttons and
then press the START/STOP Button to confirm and exit.
Measurement will start after settings.
Setup
®
Bluetooth
In addition to displaying and saving measurements locally
on the blood pressure monitor itself, you can also transfer
measurements to your mobile device via Bluetooth
so, you will need to install the "Beurer HealthManager Pro"
app. These apps are freely available in either the Apple App
, the day/month
Store or Google Play Store.
System requirements:
For a list of compatible devices, scan the QR Code below:
To transfer the measured values, proceed as follows:
. To do
®
11
• iOS ≥ 14.0, Android ≥ 8.0
≥ 4.0
®
• Bluetooth
• Start the app and follow the instructions.
• Select your blood pressure monitor in the app.
• Confirm the pairing request on your smartphone.
• Take a measurement
• If the Bluetooth
function is activated, data will be
®
automatically transferred after the measurement.
• (Data transfer at a later point): Go into the memory
recall mode for the desired user memory (see "Saving,
accessing and deleting measured values"). The data
transfer starts automatically.
Publicidad
