Publicidad
Idiomas disponibles
Idiomas disponibles
3.
heart.
4. Keep still during the measurement and do not talk.
Positioning indicator
This device has a positioning indicator below the START/
STOP Button to help determine the correct measuring
position of the device at heart level. It changes color
depending on the angle of observation.
• Position indicator appears red
- Incorrect wrist position; wrist
is either too high or too low.
• Position indicator appears green
and "OK" shows in the indicator
window
- Correct wrist position; start
measurement using the
START/STOP Button.
In the vast majority of use cases, the position indicator
provides an excellent guide as to whether the measuring
as size and/ or physique on the user side, this function
may not be helpful in all cases. If you feel that the wrist
position according to the position indicator does not
match the level of the heart, use your own judgement.
User Number Selection
This device has two user memories with 120 memory
spaces each so you can save measurements from two
the device, make sure to set the appropriate user number
before measurement. See the "Setting the hour format,
date, time, Bluetooth connectivity, and default user
number" section for instructions on selecting a desired
User Number. The user can also be chosen by pressing
the M1/M2
Performing a Measurement
1.
press the START/STOP Button. All LCD Display
elements will briefly display, before HI appears on the
display and measurement will begin after about three
seconds. To cancel a measurement at any time, press
the START/STOP Button.
13
Publicidad
