Individual Measured Values:
1. Press the M1 Button again and the last individual
measurement is displayed. Press the M1 Button once
more to view all previous measurements.
2.
You can exit the menu at any time by pressing the START/
STOP Button.
Clearing Memory:
1. To clear one of the user memories, you must first select it.
2. Start individual measurement access as described above
and select a user memory.
3. Press and hold the M1 and M2 Buttons for
five seconds. CL01 appears on the LCD
Display and all values in the selected user
memory will be deleted.
NOTE: To exit the menu at any time, press the START/STOP
Button.
9. CARE, MAINTENANCE AND
DISPOSAL
• C
cloth.
• Do not use detergents or solvents.
START/STOP Button.
18
• Never immerse the device in water or other liquids.
• When storing the device, make sure no heavy objects
are placed on top of it. Remove the batteries. Ensure
the Air Tube does not have any sharp kinks.
Disposal
Observe the local regulations for material disposal. Dispose
of the device in accordance with local regulations. If you
have any questions, please contact the local authorities
responsible for waste disposal.
10. TROUBLESHOOTING GUIDE
In case of errors, "
" will appear in the LCD Display, where
" " is a number 1-8. Error messages may appear if:
Error
Possible cause
Message
Pressure or pulse
could not be
measured
Solution
Please wait one
minute and repeat the
measurement. Ensure
that you do not talk
or move during the
measurement