Samoa PM35 Guía De Servicio Técnico Y Recambio página 7

REPAIR AND CLEANING PROCEDURE
SUSTITUCIÓN JUNTAS BAJOS
LOWER SEALS KIT (FIG. 8)
For easier service, it is recommended to stop the pump near
the lowest stroke position.
1. Unscrew the tube (J) from the pump body (D).
2. Unscrew the piston (I) from the rod (A). Take away the ball (F) and the
washer (G). Replace the V-ring (H).
3. Unscrew bolts (K), remove the outlet body (D) and replace the seals
(B, E) and guide ring (C).
4. Reassemble in reverse order, applying thread locker in all joints.
5. All these seals are included in the available kit (section SPARE
PARTS KITS).
SPARE PARTS KITS / TECHNICAL DATA / DIMENSIONS
SPARE PARTS SEE PAGES: 32, 34 and 35.
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
A
C
D
F
G
I
J
K
5
Fig. 8
LABIOS HACIA
LIPS FACING UP
ARRIBA
B
LABIOS HACIA
E
LIPS FACING DOWN
ABAJO
LABIOS HACIA
LIPS FACING UP
H
ARRIBA
Fig.8
Manual 853822
Página 9
09.09.2021
R. 03/23 853 822
EN
7