English
1 - INSTRUCTIONS BOOKLET
CONSERVATION
The present instructions booklet has been prepared for the
machine user, the owner and the installation technician and
must be always available for reference purposes.
The manual is destined for the user, the maintenance tech-
nician and machine installation technician.
The purpose of the instructions booklet is to indicate the envi-
saged uses of the machine for which it has been designed,
its technical features and in order to provide advice on cor-
rect use, cleaning and regulation. It also provides important
maintenance information, and details on any residual risks,
and all those operations which require particular care.
The present manual is to be considered as an integral part
of the machine and must be CONSERVED FOR FUTURE
REFERENCE until the final dismantling of the machine.
This instructions booklet must always be available for consul-
tation and must be kept in a protected and dry place.
In the event of loss or damage to the same, the user may
ask the manufacturer or local dealer for a new manual, in-
dicating the machine model and serial number of the same
as indicated on the identification plate.
The present manual reflects the state of the art, at the time of
its preparation, the manufacturer however reserves the right
to revise production and subsequent manuals without being
obliged to update previous versions.
The manufacturer declines all responsibility in the event of
:
- the improper or incorrect use of the coffee machine
- use that fails to comply with that specifically stated in the
present booklet
- serious lack of maintenance as envisaged or recommen-
ded
- machine modifications or any non-authorized interven-
tion
- use of either non-original or non-specific spares
- total or partial failure to observe the instructions
26
2 - ENVISAGED MACHINE
USE
The machine must be operated by a single operator only.
The authorized operator must have firstly read and fully un-
derstood all the instructions contained in the present booklet
to ensure correct machine function.
This machine is specifically intended for the professional
preparation of espresso coffee using blended coffee, as well
as the drawing and delivery of water and/or steam.
Its components are made of resilient non toxic materials,
and they are easily accessible for cleaning or maintenance
operations.
This machine is intended for internal use only.
Ambient temperature for the correct operation of the machine
5°C ÷ 25°C.