Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions
B. Threaded Rod Mounting Information:
The Cassette unit should be mounted to the building
structure using threaded rods. The threaded rods
should have washers and nuts to allow the height and
level of the cassette to be adjusted.
The threaded rods and attachment brackets are field
supplied items. The materials required for mounting to
the brackets on the cassette assembly include:
• 4- 3/8" Threaded Rods
• 4- Mounting Brackets
• 8- Washers
• 8- Nuts (Double nut the assembly as shown)
A.
Use supplied cardboard template to locate center
point of cassette for mounting. Use a plumb bob
and string to position cassette by referencing center
hole of template. Mark the mounting positions of the
threaded rods using the guides on the cardboard
template.
B.
Install threaded rods to structure using appropriate
fasteners.
10
Step 1 - Preparation (cont)
Step 2 - Installation of the Cassette Unit
C.
Lift the cassette and position the threaded rods into
the 4 mounting clips on each corner of the cassette
unit.
One Inch Recess:
• 1" (25mm) recess between ceiling surface and bottom
of unit without panel on.
1 (25)
1" (25mm)
D.
Install threaded rods to structure using appropriate
fasteners.
31-5000516 Rev. 3
Publicidad
