Makita GA4590 Manual De Instrucciones página 16

COMBINATION OF APPLICATIONS AND
ACCESSORIES
Optional accessory
CAUTION:
Using the tool with incorrect guards can cause risks as follows.
When using a cut-off wheel guard for facial grinding, the wheel guard may interfere with the work-
•
piece causing poor control.
When using a grinding wheel guard for cutting-off operations with bonded abrasive wheels and dia-
•
mond wheels, there is an increased risk of exposure to rotating wheels, emitted sparks and particles,
as well as exposure to wheel fragments in the event of wheel burst.
• When using a cut-off wheel guard or grinding wheel guard for facial operations with cup-type dia-
mond wheels, the wheel guard may interfere with the workpiece causing poor control.
• When using a cut-off wheel guard or grinding wheel guard with a wheel-type wire brush with a thick-
ness greater than the maximum thickness as specified in "SPECIFICATIONS", the wires may catch on
the guard leading to breaking of wires.
• Use of dust collecting wheel guards for cutting-off and facial operations in concrete or masonry
reduces a risk of exposure to dust.
• When using dual purpose (combined grinding and cutting-off abrasive) flange mounted wheels, only
use a cut-off wheel guard.
2 2
8
9
3
3
4
10
6
7
5
5
Fig.31
-
1
2
3
4
5
6
7
8
9
10
11
12
13
2 12 13
11
Application
-
-
-
Grinding / Sanding
-
-
Grinding / Sanding
-
Sanding
-
Wire brushing
Wire brushing
Hole cutting
1
14
17
2
3
15
3
16
15
5
115 mm (4-1/2") model
Wheel guard (for grinding wheel)
Depressed center wheel / Flap disc
Rubber pad 100
16 ENGLISH
18
3
19
16
5
5
125 mm (5") model
Side grip
Inner flange
Lock nut
Back up pad
Flex wheel
Rubber pad 115
Abrasive disc
Sanding lock nut
Wire wheel brush
Wire cup brush
Hole cutter
20
3
21
5