Publicidad
Idiomas disponibles
Idiomas disponibles
English
A, B, C, D
Burner timing light
1, 8
Bridge indicator
2
Burner head H1 display
4
Burner head H2 display
9
Burner head H3 display
10
Burner head H4 display
3
Timing display
5
ON/OFF indicator
6
ON/OFF key
7
Childlock button
11
Childlock indicator
12
INDULAP001
User Manual
Unit layout and user interface layout
12
Burner head H1 command
14
Burner head H2 command
18
Burner head H3 command
20
Burner head H4 command
13, 19
Bridge burner head
command
15
"-" key
17
"+" key
16
Timing key
User Manual
Operation Method
s
Standby
Turn on the appliance main power sup-
ply, the induction cooker will give out
a 'Beep' sound and all the display will
flash once. Then, the induction cooker
will enter standby state. In order to
enable cooktop display, the provided
safety mat should be placed at the de-
signed position. When safety mat is not
detected, the display will show "
" error
C
code and every cooktop operation is di-
sabled.
Childlock
When in standby state or when the co-
oker is working, press the 'Childlock'
(7) button for 3 seconds, the induction
cooker will give out 'Beep' sound, then,
it will be in Childlock mode and the
Childlock state indicator light will be
on (11).
Release Childlock
When in Childlock mode, press the
'Childlock' button (7) for 3 seconds, the
induction cooker will give out a 'Beep'
sound. Then, the Childlock mode will
be off and the Childlock state indicator
light will be off.
Enter Ready State
When in standby state, press the 'ON/
OFF' key (6), the induction cooker will
give out a 'Beep' sound, and the in-
duction cooker will enter preparation
INDULAP001
English
state. When in ready state, only the
ON/OFF indicator (5) will be on. If the-
re is no start action, the induction co-
oker will return to standby state in 30
seconds.
Cooking Operation
In ready state, with the silicone safety
mat placed at the designated position,
when the "burner head selection" key
(12, or 14, or 18 or 20) is pressed, the
corresponding burner head display
(2, or 4, or 9, or 10) shows "
" flashes.
0
Press the corresponding "-" (15), or "+"
(17) key within 30 seconds to select he-
ating power level: press "-" to enter the
lowest power level (display "
"); press
1
"+" to enter the highest power level
(display "
"); if there is no key confir-
9
mation within 30 seconds, the cooktop
returns to ready state.
Bridge Operation
In ready state, press the "Bridge" key
(13 or 19), the bridge indicator lights up
(1 or 8); the display (2 or 9) shows "
flashes, and enters bridge heating rea-
dy state.
In bridge heating ready state, press "-"
(15) or "+" (17) keys within 30 seconds
to directly enter different bridge hea-
ting levels: press "-" to enter the lowest
power level (display "
"), or press "+"
1
to enter the highest power level (display
"
"). If there is no key confirmation wi-
9
thin 30 seconds or if the "Bridge" key
is pressed, it will automatically exit the
bridge heating state.
"
0
13
Publicidad
