FLAEM AirMate Manual De Instrucciones página 18

TECHNICAL FEATURES
Mod. P0504EM F400
Voltage:
Safety certifications:
Max pressure:
Compressor air output:
Sound level (at 1 m):
Operation:
Operating conditions:
Temperature:
RH Air humidity:
Atmospheric pressure:
Storage conditions:
Temperature:
RH Air humidity:
Atmospheric pressure:
Dimensions (W)x(D)x(H):
Weight:
APPLIED PARTS
Type BF applied parts are:
RF8 Dual Speed nebuliser
Medication minimum capacity:
Medication maximum capacity:
Operating pressure (with neb.):
Delivery:
(1)
MMAD:
(2)
Breathable fraction < 5 μm (FPF):
(2)
(1) Data recorded according to internal Flaem procedure I29-P07.5.
(2) In vitro testing performed by TÜV Rheinland Italia S.r.l. in collaboration with the University of Parma and in
compliance with the EN 13544-1: 2007 + A1 European Standard for aerosol therapy devices Standard. More
details are available on request.
ELECTROMAGNETIC COMPATIBILITY
This device was designed to satisfy the currently required requisites for electromagnetic
compatibility (EN 60601-1-2). Electro-medical devices require particular care during
installation and use relative to EMC requirements. Users are therefore requested to
install and/or use these devices following the manufacturer's specifications. Risk of
potential electromagnetic interference with other devices. Mobile or portable RF
radio and telecommunication devices (mobile phones or wireless connections) may
interfere with the operation of medical devices. For more information, visit the website
www.flaemnuova.it. The appliance may be susceptible to electromagnetic interference
in the presence of other devices used for specific diagnoses or treatments. Flaem
reserves the right to make technical and functional changes to the product without
prior notice.
230V~ 50Hz 130VA
1.8 ± 0.3 bar
9 l/min approx
54 dB (A) approx
Continuous
min 10°C; max 40°C
min 10%; max 95%
min 69KPa; max 106KPa
min -25°C; max 70°C
min 10%; max 95%
min 69KPa; max 106KPa
16 x 20 x 12 cm
1.500 Kg
patient accessories (C2, C3, C4, C5)
2 ml
8 ml
0.8 bar
C1.2.3 speed selector
in Max pos
0.40 ml/min approx.
4.48 μm
55.5 %
16
in pos Min
0.19 ml/min approx.
4.01 μm
61.1 %