Wolf FHA Instrucciones De Montaje página 11

FHA
1.1 Final steps
1. Increase the system pressure.
2. Plug in the electrical connection of the electric booster heater at the control panel.
3. Jumper set: Depending on the electricity supply.
3~ 400VAC 50Hz 3x2kW
Netz
4. Fit casing.
5. Electrically connect the indoor unit and the electrical connection of the electric booster heater.
9148741 | 202208
1
jumper
2
1~ 230VAC 50Hz 2x2kW
jumper
Netz
Installing the 6 kW electric booster heater | 1
3
1~ 230VAC 50Hz 3x2kW
Netz
WOLF GmbH | 11
jumper