Wolf FHA Instrucciones De Montaje página 14

2 | Replacing the 6 kW electric booster heater
2.1 Final steps
1. Increase the system pressure.
2. Plug in the electrical connection of the electric booster heater at the control panel.
3. Jumper set: As long as the electricity supply does not change, there is no need to move the jumper.
3~ 400VAC 50Hz 3x2kW
Netz
4. Fit casing.
5. Electrically connect the indoor unit and the electrical connection of the electric booster heater.
14 | WOLF GmbH
1
jumper
2
1~ 230VAC 50Hz 2x2kW
jumper
Netz
3
1~ 230VAC 50Hz 3x2kW
jumper
Netz
9148741 | 202208
FHA