ENGLISH
3.
Install both side brushes in their corresponding slots, located on the bottom part of the
robot vacuum cleaner. Press until it clicks to make sure they are properly fixed. Fig. 5
4.
Connect the robot vacuum cleaner to the self-emptying base and make sure the charging
terminals on the robot match those of the base. Once the robot vacuum cleaner is properly
placed, it will beep once, and the light indicator will come on. If the light is flashing, it
means the battery is not completely charged. To ensure the maximum cleaning time, wait
until the light turns steady, as this will indicate the battery is fully charged and the robot
vacuum cleaner is ready to clean. Fig. 6.
Information on the self-emptying base
-
The self-emptying base includes a loading and emptying function and a new dirt-
disposal bag. After cleaning, the robot will automatically return to the self-emptying
base to recharge. The self-emptying base will empty the dirt tank based on the emptying
scheduled selected on the app.
-
If the robot vacuum cleaner is charging on the self-emptying base, you can force the robot
to self-empty. Press the Back Home button for the self-emptying base to empty the dirt
tank.
4. OPERATION
Starting the cleaning
-
Hold down the Start/Pause button on the robot vacuum cleaner to turn it on.
-
Press the Start/Pause button on the robot vacuum cleaner or on the app to start cleaning.
Note
-
If the robot vacuum cleaner runs out of battery while cleaning, it will automatically return
to the self-emptying base. Once the battery is fully charged, the robot can start a new
cleaning cycle.
-
The robot vacuum cleaner will not be able to return to the self-emptying base if it can't
easily access it. If this happens, manually place it in the self-emptying base.
Pausing the cleaning
-
Press the Start/Pause button on the robot vacuum cleaner or on the app to pause the
cleaning process.
-
Press the Start/Pause button on the robot vacuum cleaner or on the app to resume the
cleaning process.
Back to the self-emptying base
Press the Back Home button on the robot vacuum cleaner or select the option from the app
(house icon) to send the robot vacuum cleaner to the self-emptying base. The robot vacuum
cleaner will stop vacuuming until it reaches the base.
50
CONGA 2299 ULTRA HOME X-TREME
Turning off
Hold down the Start/Pause button on the robot vacuum cleaner to turn it off.
Warning
If you are not going to use the robot vacuum cleaner for an extended period of time, it is
advisable to leave it switched off until new use.
Cleaning modes
The robot vacuum cleaner includes different modes and functions that can be toggled from
the app.
Automatic mode
-
Press the Start/Pause button or select the auto cleaning mode on the app, then the robot
vacuum cleaner will start the automatic cleaning.
-
The robot vacuum cleaner will clean the whole surface, edges, around objects such as
tables, chairs etc., until the battery is low, after which it will return to the self-emptying
base.
Random mode
-
The robot vacuum cleaner will clean randomly until the battery percentage is low and it
will return to the self-emptying base.
-
To activate this mode, press the random cleaning button on the app.
Scrubbing mode. Fig. 7.
-
Fill the water tank.
-
Attach the mop to the bracket and the latter to the mixed tank.
-
Place the mixed tank on the robot vacuum cleaner and select the scrubbing level on the
app. There are three scrubbing levels: Low, Medium, High.
-
Once you have selected the desired scrubbing level on the app, the robot vacuum cleaner
will start the All in One function to vacuum, scrub, and sweep simultaneously thanks to its
mixed tank.
Note
-
If you wish to mop, do not fill the water tank.
-
When the robot vacuum cleaner has the mixed tank with water in it, it will rotate on its own
to dampen the mop as it leaves the base.
-
To ensure a perfect scrubbing from the start, it is suggested to dampen the mop evenly
with water before fixing it to the mixed tank. It is also recommended to wash the mop after
every use.
-
It is recommended to be present when the robot vacuum cleaner is scrubbing.
-
When the robot vacuum cleaner returns to the self-emptying base, the mop must be
removed. Do not leave the robot vacuum cleaner charging with the mop assembled.
ENGLISH
51
CONGA 2299 ULTRA HOME X-TREME