Cuda surgical LED-4000 Manual Del Operador página 7

5. OVERVIEW
No. Name
1 Light Guide Adaptor
2 LCD Intensity Display
3 Intensity increase
button
4 STANDBY mode
button
5 Mains power switch
6 Intensity decrease
button
7 Warning Indicator
®
LIT-216 CUDA Surgical
Rev. E
FRONT PANEL
Function
Light guide connection point. The active illumination port is
always in the top-most position.
Displays the current intensity level of illumination. Each fully lit
tile indicates approximately 10% increase of brightness.
Button that increases illumination brightness
Activates or de-activates STANDBY mode. STANDBY mode
extinguishes the illumination LED but allows the unit to remain
energized.
Turns unit ON/OFF
Button that decreases illumination brightness
When illuminated, indicates device fault
Page 7 of 104
(English)