Operating Temperature; Operation With Remote Control - Qlima S42 Serie Instrucciones De Uso

C

OPERATING TEMPERATURE

Cooling, heating and / or dehumidifying are effective at the following indoor and outdoor temperatures:
Temperature
Room temperature
Outdoor temperature
CAUTION
• If air conditioner is used outside of the above conditions, certain safety protection features may
come into operation and cause the unit to function abnormally.
• If the air conditioner operates in excess of a relative humidity of 80% in the room, the surface
of the air conditioner may attract condensation. Please set the vertical air flow louver to its
maximum angle (vertically to the floor), and set HIGH fan mode.
• For maximum effect of your air conditioner always close doors and windows when cooling or
heating.
D

OPERATION WITH REMOTE CONTROL

G
NOTE!
• Always aim the remote controller towards the receiver on the indoor unit and make sure there
are no obstacles in between the remote control and the receiver on the indoor unit. Otherwise
the remote control signal will not be picked up by the receiver and the air conditioner will not
work properly.
• The maximum distance at which the remote control will work is approximately 6 to 7 meters.
G
NOTE!
Keep the remote controller where its signal can reach the receiver of the unit. When you select
the timer operation, the remote controller automatically transmits a signal to the indoor unit
at the specified time. If you keep the remote controller in a position that hinders proper signal
transmissions, a time lag of up to 15 minutes may occur.
4
90
Mode Cooling operation
17ºC - 32ºC
-25ºC - 50ºC
Heating operation Dehumidifying operation
0ºC - 30ºC
-25ºC - 30ºC
10ºC - 32ºC
0ºC - 50ºC