Descargar Imprimir esta página

Sauder Bandit 425667 Manual Del Usuario página 24

Publicidad

Step 18
å
NOTE: The following instructions show your unit being fastened to a wall stud. If you are not fastening your unit to a
wall stud, go to Step 19 now.
å
Carefully stand your unit upright against the wall in its final location.
å
Locate the center of a stud in your wall near your unit and mark it with a pencil. Next, drill a 1/8" hole on the mark and
into the stud in your wall.
å
Fasten the unit to the wall. Use the long screw through the other end of the strap and into the 1/8" hole.
Electric drill with 1/8" bit
Drill 1/8" hole into
a stud in your wall.
96

Publicidad

loading