Step 19
å
1
-Carefully stand your unit upright against the wall in its final location. With your pencil, put a mark through the center
st
of the hole in the SAFETY STRAP.
å
2
-Drill a 3/8" hole on the marks.
nd
å
3
-While you squeeze the wings together, gently tap the WALL ANCHOR from the FURNITURE TIPPING RESTRAINT
rd
KIT into the hole until they are even with the surface of the wall.
å
Turn the long screw through the hole in the SAFETY STRAP and into the WALL ANCHOR.
å
NOTE: You will need to turn the long screw multiple turns to completely tighten and secure your unit to the wall.
96
3
rd
Mark and drill a
3/8" hole into
the wall.
Electric drill with 3/8" bit
1
st
2
nd