Dantherm CDT 90 MKII Manual Del Usuario página 6

Preparation and transport guide
Introduction This section is a guide to unpacking, preparation, transport and storage
Warning If the machine has been transported lying down, allow it to stand upright for at least 1
hour before use.
Unpacking Follow these steps for unpacking:
4
Step Action
1 Pull the box free of the de-
humidifier
2 Lift the dehumidifier of the
pallet. It is now ready to be
positioned as shown below
3 Connect the hose spigot
provided
4 Remove the protective foil on the control panel
Illustration
Continued on next page