decorflame QCM202-50 Manual De Instrucciones página 6

OPERATION BY THE
REMOTE CONTROL
Plug in your electric fireplace and it will
beep once, this means you have power
and your remote is ready to operate your
electric fireplace.
FLAME/LOG: Press this button for flame
effect. The unit will be beep and the
indicator light above the button on electric
fireplace will be on. The bulbs for Flame
Effect & Log-set will be on. Pressing but-
ton again will stop the flame effect.
NIGHTLIGHT: Press this button for night
light effect. The unit will be beep and the
indicator light above the button on electric
fireplace will be on. The 2 pcs night light
bulbs will be on. Pressing button again
will stop the nightlight function.
750W: Press this button for low heat level.
The unit will beep, the pilot light and indi-
cator light will be on. The fireplace heater
will give low heat level. Pressing once
again will stop the low heat level function.
1500W: Press this button for high heat
level. The unit will beep, the pilot light and
indicator light will be on. The fireplace
heater will give high heat level. Pressing
once again will stop the high heat level
function.
O P E R A T I O N
6
REMOTE CONTROL BATTERY
REPLACEMENT
Replace with 2 AAA batteries.
WARNING: Do not mix old and new batteries
Do not mix alkaline, standard (Carbon-Zinc),
or rechargeable (Nickel Cadmium) batteries.