Publicidad
Idiomas disponibles
Idiomas disponibles
For the combination indicated above,
there are four active control bars. The left
front pot is indicated by A indicator
visible on the first control bar. The left
rear pot is indicated by B indicator on the
second control bar. The middle pot is
indicated by indicators A B C D visible on
the third control bar. The right front pot is
indicated by C indicator visible on the
fourth bar.
It is not possible to use more
than 4 pots in this
combination.
5.8 Incorrect cookware
positions
5.9 Bridge
If you place cookware on two or more
standard cooking zones and the heat
setting level is set to 0,
If the default configuration is not
appropriate for your cookware, press
repeatedly to choose the desired
configuration manually.
The following modes are available:
• Centre
• Vertical
• Horizontal
• Standard cooking zone
The cooking zone indicators change
automatically to show the possible
combination.
All single triangles of one mode are
controlled by one control bar which lights
up.
When you change the heat setting,
disappears. When the heat setting is set
to 0,
comes on again.
5.10 PowerBoost
This function activates more power for
the appropriate induction cooking zone,
depending on the cookware size. The
function can be activated only for a
limited period of time.
It is not possible to use the function when
Bridge is activated in the Centre, Vertical
or Horizontal mode.
To activate the function for the
cooking zone: touch
turns red.
The function deactivates automatically.
ENGLISH
13
appears.
. The symbol
Publicidad
