Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: Photographs and line drawings used in this manual are for reference
only and do not represent a specific model.
Compare the illustrations with your unit to familiarize yourself with the location of
various controls and adjustments. Save this manual for future reference.
1
B
BASIC ELEMENTS OF A PRESSURE WASHER (FIG. 1)
A. High Pressure Pump: Increases the pressure of the water supply.
B. Engine: Drives the high pressure pump. Refer to the Engine Owner's Manual
for location and operation of engine controls.
C. High Pressure Hose: Carries the pressurized water from the pump to the gun
and spray wand.
D. Spray Gun: Connects with spray wand to control water flow rate, direction and
pressure.
E.
Spray Wand: See How To Use Spray Wand instructions in Operation section.
F.
Detergent Siphon Hose (not shown): Feeds cleaning agents into the pump to mix
with the water. See How To Apply Chemicals/Cleaning Solvents instructions
in Operation section.
G. Handle
H. Frame
I.
Pump Outlet
J.
Pump Inlet
GET TO KNOW THE PRESSURE WASHER
C
K
G
10- ENG
D
E
A
H
J
I
Publicidad
