Panasonic SA-PM38 Instrucciones De Funcionamiento página 11

Using sound effects
Selecting sound effects
You can change the sound effect by selecting Preset EQ or adjusting the
bass or treble effect.
Preset EQ
Press [PRESET EQ] repeatedly to select your desired setting.
HEAVY CLEAR SOFT
Setting Effect
HEAVY Adds punch to rock
CLEAR Clarifies higher frequencies
SOFT For background music
VOCAL Adds gloss to vocals
FLAT No effect
Bass or treble
Enables you to enjoy the lower or higher pitch sound.
1 Press [BASS/TREBLE] repeatedly to select your desired
setting.
BASS
Original display
Setting Effect
BASS For lower pitch sound
TREBLE For higher pitch sound
2 Press [u/t] or [y/i] to adjust the level.
Note
The tone level can be varied within -4 to +4.
Enjoying surround sound
Enables you to add natural width and depth to the stereo sound.
To activate
Press [SURROUND] to display "
To cancel
Press [SURROUND] again to clear "
Note
• Surround sound is less discernible when listening through
headphones.
• If interference in FM stereo reception increases, cancel the surround
sound effect.
VOCAL FLAT
TREBLE
" indicator.
" indicator.
Enhancing the bass
Enables you to enjoy the powerful bass effect.
Press [D.BASS] to turn the D.BASS function on/off.
Note
The actual effect depends on the music source.
Re-master–Enjoying more natural sound
MP3
Digital remaster is effective on CD (MP3) and USB
Analog remaster is effective on iPod
This feature reproduces the frequencies lost during recording to give you
a sound closer to the original.
Press [RE-MASTER] during play to select "ON RE-MASTER".
• Each time you press the button:
ON RE-MASTER OFF RE-MASTER
11
11 11