Using the Camera
Please refer to the Camera User Guide for instructions
on how to use the camera.
Underwater Mode
Setting the camera to S mode will tone down the
blues, letting you obtain more natural colors when
shooting underwater.
q Button
p Button
1
Set the mode dial to K.
2
After pressing the m button, press the
op buttons to choose I .
3
Press the q r buttons to choose S , then
press the m button.
10
Mode Dial
Button
o Button
r Button
m Button
•
When shooting underwater in
D modes, you should set the white balance to S
(Underwater) using the FUNC. menu.
•
You can set the white balance manually with the
press of a single button if you assign the
White Balance) function to the
for adjusting the white balance to the shooting
conditions.
Using the Control Dial
Using the control dial with the waterproof case differs
slightly from that of the camera itself.
q r buttons while pressing the
•
Press the
E , G , M , B or
(Custom
button. Try this
button.