Descargar Imprimir esta página

Kenwood DPX301U Manual De Instrucciones página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

SiriusXM® Radio
CHANNEL LOCK
To unlock settings:
1 Turn the volume knob to select a number.
2 Press S / T to move to the entry position.
3 Repeat steps 1 and 2 to enter the current pass code.
(Initial pass code is 0000.)
4 Press the volume knob to confirm.
CODE SET
1 Turn the volume knob to select a number.
2 Press S / T to move to the entry position.
3 Repeat steps 1 and 2 to enter a new 4-digit pass code.
4 Press the volume knob to confirm.
5 Repeat steps 1 to 4 to reconfirm the pass code.
• Make a note of the new pass code to enter channel lock settings from
next time.
LOCK SETTING
MATURE CH: Selects the SiriusXM-defined lock setting. ; USER
DEFINED: Selects the user-defined lock setting. ; OFF: Cancels.
CHANNEL EDIT *
1
1 Turn the volume knob to select a category, then press the knob.
2 Turn the volume knob to select a channel you want to lock, then press
the knob.
"L" appears in front of the channel number.
3 Press and hold
CHANNEL CLEAR *
1
YES: Clears all the locked channels. ; NO: Cancels.
TUNE START *
2
ON: Selected SmartFavorite channel starts playback from the beginning of
the song. ; OFF: Cancels.
SIGNAL LEVEL
NO SIGNAL/ WEAK/ GOOD/ STRONG: Shows the strength of the current
received signal.
BUFFER USAGE
0% — 100% (0): Shows the memory usage for Replay buffer.
SXM RESET
YES: Resets stored channel and lock setting to default. ; NO: Cancels.
*
1
Displayed only when [USER DEFINED] is selected.
*
2
Available only if the connected SiriusXM Vehical Tuner is SXV200 or later that supports
SmartFavorites.
to exit.
AUX
Preparation:
Select [ON] for [BUILT-IN AUX]. (  5)
Start listening
1
Connect a portable audio player (commercially available).
Auxiliary input jack
3.5 mm (1/8") stereo mini plug with "L"
shaped connector (commercially available)
2
Press
repeatedly to select AUX.
3
Turn on the portable audio player and start playback.
Set the AUX name
While listening to a portable audio player connected to the unit...
1
Press FNC to enter [FUNCTION].
2
Turn the volume knob to select [SYSTEM], then press the knob.
3
Turn the volume knob to select [AUX NAME SET], then press the
knob.
4
Turn the volume knob to make a selection, then press the
knob.
AUX (default)/ DVD/ PORTABLE/ GAME/ VIDEO/ TV
5
Press and hold
to exit.
To return to the previous setting item, press
Portable audio player
.
13
ENGLISH

Publicidad

loading