Bestron ASF3000P Manual Del Usuario página 26

1. Shut down the appliance by turning both the temperature dial and timer dial all the way to the left. Take
the plug from the socket.
2. Give the appliance ample time to cool down.
function - Hotkey function
The hot air fryer has a default setting of 180°C and 10 minutes.
1. Put the plug (3) into the socket. You will hear a beep and and a blue on/off button (11) appears.
2. Keep the on/off button pressed for 3 seconds. The digital display will switch on. In the display you will
see "80°C" and "10 min".
3. Press the blinking orange start/pause (12).
4. The hot air fryer will switch on and the time in the display will run down.
When the hot air fryer is done you will hear a beep. The display will turn off and the hot air fryer will enter
standby mode.
If you do not press the start button, the hot air fryer will switch to its standby mode after +/- 1 minute.
function - Program settings
The hot air fryer has a default setting of 180°C and 10 minutes. You can adjust this manually.
Adjusting temperature:
1. Put the plug (3) into the socket. You will hear a beep and and a blue on/off button (11) appears.
2. Keep the on/off button pressed for 3 seconds. The digital display will switch on.
3. Press up (10a) to increase the temperature. The maximum temperature is 200°C.
Press down (10b) to decrease the temperature. The minimum temperature is 60°C.
The temperature is adjustable by degrees of 5°C.
Adjusting time:
1. Press up (15a) to increase the time. You can increase the time up to 60 minutes (the display will read
01.00). Press down (15b) to decrease the time. You can decrease the time down to 1 minute (the display
will read 00.01).
The time is adjustable by degrees of 1 minute.
2. When you are done setting the temperature and time, press the blinking orange start/pause button (12).
The hot air fryer will switch on and the time in the display will run down.
When the hot air fryer is done you will hear a beep. The display will turn off and the hot air fryer will enter
standby mode.
• If you do not press the start button, the hot air fryer will switch to its standby mode after +/- 1 minute.
• After the hot air fryer has started its program you will still able to adjust the time and temperature at
any moment by pressing the appropriate buttons.
function - defrosting program
The hot air fryer is equipped with a defrosting program. With this program you can easily defrost products
before baking them in the hot air fryer.
1. Put the plug (3) into the socket. You will hear a beep and and a blue on/off button (11) appears.
2. Keep the on/off button pressed for 3 seconds. The digital display will switch on.
3. Press the defrost button (16). In the display the default setting of 180°C and 10 min. will change to 60°C
and 5 min.
4. When you are done setting the temperature and time, press the blinking orange start/pause button (12).
The hot air fryer will switch on and the time in the display will run down.
If the deep frozen foods have not been fully defrosted you may choose to run this program again.
26
instruction manual