Bestron ASF3000P Manual Del Usuario página 27

instruction manual
• If you do not press the start button, the hot air fryer will switch to its standby mode after +/- 1 minute.
• After the hot air fryer has started its program you will still able to adjust the time and temperature at
any moment by pressing the appropriate buttons.
function - timer
The hot air fryer is equipped with a timer function. Through this function you can program the hot air fryer to
start baking at a later time, within a maximum of twelve hours.
1. Put the plug (3) into the socket. You will hear a beep and and a blue on/off button (11) appears.
2. Keep the on/off button pressed for 3 seconds. The digital display will switch on.
3. Press the timer button (17) and the set time will change from 10 minutes to 00.00. The display will be
blinking. As long as the display is blinking you can adjust the set time.
4. Press up (15a) to increase the time. Press down (15b) to decrease the time if you have made a mistake.
5. When you are done setting the time, press the timer button (17) again and wait a few seconds. The
display will stop blinking and the setting 180°C and 10 min. will appear again.
6. Press the blinking orange start/pause button (12). The display will now show the time you've set.
The time will start to run down. As soon as it hits 00:00, the hot air fryer will start heating. When the hot air
fryer is done you will hear a beep.
• Timer is adjustable by degrees of 30 minutes up to max. 12 hours.
• If you do not press the start button, the hot air fryer will switch to its standby mode after +/- 1 minute.
You will have to enter all settings again.
• You can adjust the temperature and running time manually, if you wish. See "Program settings".
• If you take the frying basket (14) out of the appliance, it will stop running. The time will NOT keep
running. After placing back the frying basket, the appliance will start running again.
oPerAtion - use
This multi-faceted appliance can not only be used as a hot air fryer but as an oven as well, so with its simple
settings you can easily and endlessly vary. The baking time for oven dishes is often much shorter as well,
and pre-heating only takes two to three minutes.
Attention: use the food separator when preparing two different dishes at the same time.
1. Place the hot appliance on a stable, horizontal, flat surface.
2. Pull the tray by the grip from the appliance and place it on a stable, horizontal, flat surface. Press the
release button and take the frying basket from the tray.
Do not press the release button when taking the tray from the appliance.
3. Put the foods into the frying basket and enter it into the tray until you hear a click.
Never fill the frying basket beyond the MAX indication.
4. Enter the tray with the frying basket into the appliance until you hear a click.
5. Set the desired time and temperature. See "Program settings".
• It's recommended to pre-heat the appliance for three minutes without any foods if the appliance is
still cold.
• It is recommended to occasionally take out the frying basket and shake the food around a bit to make
sure it's being properly browned on all sides.The timer will not stop running if you do this but the
heating element will pause until the tray has been entered into the appliance again.
• Do not touch the tray and frying basket, they can become very hot. Take precautions against burns.
Use a coaster or something similar when taking out the tray.
7. When the hot air fryer is done you will hear a beep. The appliance will stop heating. Pull the tray from the
appliance by the grip and place it on a stable, horizontal, flat surface
• Do not press the release button when taking the tray from the appliance.
27