Descargar Imprimir esta página

Roadstar HRA-1180AUX Manual De Instrucciones página 3

Publicidad

WARNINGS
The exclamation point within the triangle is a warning sign alert-
ing the user of important instructions accompanying the
product.
The lightening flash with arrowhead symbol within the triangle
is a warning sign alerting the user of "dangerous voltage" inside
the unit.
To reduce the risk of electric shock, do not remove the cover. No
CAUTION
user serviceable parts inside the unit. Refer all servicing to
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
qualified personnel.
230v~
This unit operates on 230V ~ 50Hz. If the unit is not used for a
long period of time, remove the plug from the AC mains.
Make sure all batteries are inserted according to the proper
-
+
polarity. Do not mix old batteries with new ones.
If the unit is not used for a long period of time (more than 1
-
+
month), remove all batteries from their compartment to avoid
possible leaking.
This unit must not be exposed to moisture or rain.
The power switch in this unit is mounted on the secondary
circuit and does not disconnect the whole unit from the mains in
OFF position.
Ensure all connections are properly made before operating the
unit.
This unit should be positioned so that it is properly ventilated.
Avoid placing it, for example, close to curtains, on the carpet or in
a built-in installation such as a bookcase.
Do not expose this unit to direct sunlight or heat radiating sources.
1
English
1
2
CONNECTING TO POWER
Before switching on make sure that the voltage of your electricity supply is the same as
that indicated on the rating plate.
For your own safety read the following instructions carefully before attempting to connect
this unit to the mains.
MAINS (AC) OPERATION
Use with AC/DC adaptor (included)
1.Insert the DC plug, at the end of the AC/DC adaptor cord, into the DC 7.5 V INPUT socket
(4) located on the rear side of the unit.
2.Connect the AC/DC adaptor into a 230V ~ 50Hz AC power outlet.
Notes:
•If the AC adaptor is connected when regular batteries are installed, the power supply
automatically switches to the AC power source.
•Use only the supplied AC/DC adaptor. Using other types of adaptor may damage the unit.
•Make sure that the AC/DC adaptor matches with your household voltage before connec
ting it into the wall outlet.
•When not using AC power, disconnect the AC/DC adaptor from the wall outlet.
•Do not touch the AC/DC adaptor with wet hands.
BATTERY OPERATION
RADIO OPERATION
1.
2.
3.
4.
5.
CLOCK AND ALARM OPERATION
SETTING THE LCD DISPLAY
1. In the normal Display mode, to set the TIME, press SET Button (7) and the HOUR
2. To set the MINUTE, press SET once more and the MINUTE digits will flash. Press ADJ
English
Open the Battery Compartment (13) at the rear of the radio and insert 5 UM-3 batteries
following the polarity diagram shown inside the battery compartment.
Batteries should be removed form the compartment if the unit is not to be used for
some time.
Flat batteries should be removed from the unit to avoid leakage.
Move the Function Knob (10) and select the ON mode.
Move the radio wave band (AM or FM) using the BAND Button (11)
Adjust the Antenna (12) for best reception.
Search for the station of your choice using the Tuning knob (2).
To switch off the radio, Move the Function Knob (10) and select POWER OFF
digits will flash. Press ADJ (6) to adjust the HOUR digits.
to adjust the MINUTE digits.

Publicidad

loading