WIKA PG43SA-D Manual De Instrucciones página 15

5. Commissioning, operation
5.8 Autoclaving
Observe the permissible conditions of autoclaving, see chapter
„
9.3 "Permissible temperature"
During the autoclaving process, no weight-loading must be exert-
„
ed via the case and the instrument must not lie on its window.
After the first autoclaving cycles, the window slightly arches
„
outward. This has no effect on the function of the instrument.
Depending on the autoclaving process, whitish residues can build
„
up on the window and pointer. This has no effect on the function of
the instrument.
In case of a zero offset, carry out a zero point setting. See chapter
„
5.7 "External zero point setting".
WIKA operating instructions disphragm pressure gauge, model PG43SA-D
EN
15