Publicidad
Idiomas disponibles
Idiomas disponibles
Mode H:
channel
1
2
3
4
colour temperature
5
8.
Cleaning and Maintenance
All screws shall be tightened and free of corrosion.
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) shall not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting
supports, do not change the location of the connections...
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
Disconnect the device from the mains prior to maintenance activities. Let the device cool down.
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
Do not immerse the device in any liquid.
There are no user-serviceable parts, apart from the fuse.
Contact your dealer for spare parts if necessary.
Replacing the Fuse
Only replace the fuse by a fuse of the same type and rating.
1.
Before replacing the fuse, switch off the device and unplug the mains lead.
2.
Unscrew the fuse holder [7] with the appropriate screwdriver.
3.
Remove the old fuse and install the new fuse in the fuse holder.
4.
Replace the fuse holder in the housing and tighten it.
9.
Technical Specifications
power supply
power consumption
IP rate
LEDs
beam angle
DMX connection
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 01 – 18/11/2014
function
from
dimmer
000
strobe
000
UV 1
000
UV 2
000
000
100-240 VAC, 50/60 Hz
30 W
IP20
12 x 1 W high-power LEDs
40°
3-pin XLR in- and output
300 x 100 x 140 mm (bracket not incl.)
4.5 kg
VDPL1201UV
to
description
255
255
255
255
255
8
©Velleman nv
Publicidad
