Metrix GX-1030 Guia De Inicio Rapido página 15

The GX 1030 is a dual-channel function/arbitrary waveform generator with specifications of up to 30 MHz maximum
bandwidth, 150 MSa/s sampling rate and 14-bit vertical resolution.
The proprietary EasyPulse technology helps to solve the weaknesses inherent in traditional DDS generators when
generating pulse waveforms, and the special square wave generator is capable of generating square waveforms with
up to 30 MHz frequency and low jitter.
With these advantages, GX 1030 can provide users with a variety of high fidelity and low jitter signals and can meet the
growing requirements of complex and extensive applications.
KEY FEATURES
Dual-channel, with bandwidth up to 30 MHz and amplitude up to 20 Vpp
„
150 MSa/s sampling rate, 14-bit vertical resolution, and 16 kpts waveform length
„
Innovative Easy Pulse technology, capable of generating lower jitter
„
Pulse waveforms, brings a wide range and extremely high precision in pulse width and rise/fall times adjustment
„
Special circuit for a Square wave, which can generate Square wave with frequencies up to 60 MHz and jitter less
„
than 300 ps + 0.05 ppm of period
A variety of analog and digital modulation types: AM, DSB-AM, FM, PM, FSK, ASK, PSK and PWM
„
Sweep and Burst functions
„
Harmonic waveforms generating function
„
Waveforms combining function
„
High precision Frequency Counter
„
196 kinds of built-in arbitrary waveforms
„
Standard interfaces: USB Host, USB Device(USBTMC), LAN (VXI-11)
„
LCD 4.3" display 480X272 points
„
POWER INPUT VOLTAGE
The instrument has a universal power supply that accepts a mains voltage and a frequency between:
- 100 - 240 V (± 10 %), 50 - 60 Hz (± 5 %)
- 100 - 127 V, 45 - 440 Hz
Before connecting to a mains outlet or power source, ensure that the ON/OFF switch is set to OFF and verify that the
power cord and extension cord are compatible with the voltage/current range and that the circuit capacity is sufficient.
Once the checks are done, connect the cable firmly.
The mains power cord included in the package is certified for use with this instrument. To change or add an extension
cable, make sure that it meets the power requirements of this instrument. Any use of unsuitable or dangerous cables
will void the warranty.
PRESENTATION
PRECAUTIONS FOR USE
15