Metrix GX-1030 Guia De Inicio Rapido página 21

HARMONIC FUNCTION
The GX 1030 can be used as a harmonic generator to output harmonics with specified order, amplitude and phase.
According to the Fourier transform, a periodic time domain waveform is the superposition of a series of sine waveforms.
USER INTERFACE
The GX 1030 can only display parameters and waveform information for one channel at a time.
The picture below shows the interface when CH1 chooses AM modulation of a sine waveform. The information displayed
may vary depending on the function selected.
1) Waveform Display Area
Displays the currently selected waveform of each channel.
2) Channel status Bar
Indicates the selected status and output configuration of the channels.
21