Transport, Packaging And Storage; Commissioning, Operation - WIKA PU-548 Manual De Instrucciones

4. Transport ... / 5. Commissioning, operation

4. Transport, packaging and storage

4.1 Transport
EN
Check the programming unit for any damage that may have been caused
by transport. Obvious damage must be reported immediately.
4.2 Packaging and storage
Do not remove packaging until just before mounting.
Permissible conditions at the place of storage:
Storage temperature: -20 ... +70 °C
■
Humidity: 10 ... 90 % relative humidity (absolutely avoid
■
condensation!)
Avoid exposure to the following factors:
Direct sunlight or proximity to hot objects
■
Mechanical vibration, mechanical shock (putting it down hard)
■
Soot, vapour, dust and corrosive gases
■
Hazardous environments, flammable atmospheres
■
All types of liquids
■

5. Commissioning, operation

Software installation for WIKAsoft-TT
Free download of the current version of the WIKAsoft-TT software at
www.wika.de/download.
8
If the instrument has visible external damage (e.g. on the
case), it must not be used or must be taken out of operation
immediately.
For the installation of the WIKAsoft-TT software,
administrator rights are required. Alternatively, you can
download a drop-in version of WIKAsoft-TT, which does not
require any installation.
WIKA operating instructions programming unit PU-548