Transport, Packaging And Storage - WIKA GDT-20 Manual De Instrucciones

3. Safety / 4. Transport, packaging and storage
Product label, model GDT-20

EN





Made in Germany www.wika.com
P# article number

S# serial number

Measuring range pressure

Temperature measuring range

Measuring range density

Explanation of symbols

4. Transport, packaging and storage

4.1 Transport
Check the transmitter for any damage that may have been caused by transport.
Obvious damage must be reported immediately.
4.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change in
installation site, sending for repair).
4.3 Storage
Permissible conditions at the place of storage:
Storage temperature: -40 ... +80 °C [-40 ... +176 °F]
■
Humidity: 90 % r. h. (non-condensing)
■
32
GDT-20

Before mounting and commissioning the instrument, ensure you read the
operating instructions!
WIKA operating instructions transmitter, models GDT-20 and GDHT-20
Measuring range dew point

Communication protocol

Supply voltage

Pin assignment

Coded date of manufacture


