Num'axes PIE1046 Manual De Instrucciones página 22

Cam PIR
Camera ID
Camera Mode
Flash LED
Photo resolution
Night Mode
OK Set
Cam
Settings
Camera ID
Camera Mode
Flash LED
Photo Resolution
Night Mode
Multi shot
Video resolution
Video length
Cam PIR
PIR Switch
PIR Sensitivity
PIR Interval
Time Lapse
Working timer No 1
OK Set
PIE1046 - Indice A –Septembre 2020
4G Other
OFF
All
8 MP
Exit
MENU
Programmable options (default settings in bold characters)
ON / OFF
Select "ON" then press "OK" to set an ID number for the camera (12 digits/letters).
Such function can help you identify from where and from which camera the photos
are.
Photo / Video / Photo + Video
− Photo: the camera shoots only photos based on the configured "Multi-shot" and
"Photo resolution" settings.
− Video: the camera shoots only videos based on the configured "Video resolution"
and "Video length" settings.
− Photo + Video: upon the same trigger event, the camera shoots photo(s) first
then a video based on the configured "Photo resolution/Multi-shot" and "Video
resolution/Video length" settings.
All / Part
− All: all 60 infrared LED will work in dark environment.
− Part: part of the infrared LED will be turned off.
24MP (5632x4224) / 12MP (4032x3024) / 8MP (3264x2448)
Maximum range / Balanced / Minimum blur
− Maximum range: this setting offers a longer exposure time to extend the infrared
flash range for a better night vision (lower quality image).
− Minimum blur: this setting offers a short exposure time to minimize motion blur
for a better image quality (shortened infrared flash range).
− Balanced: this setting offers a combination of the above 2 options.
1 photo / 2 photos / 3 photos / 4 photos / 5 photos
Programmable – From 1 up to 5 photos per trigger
FULL HD – 1080P (1920x1080) / HD – 720P (1280x720) / WVGA (848x480)
05 – 59 seconds – Default setting: 10 seconds
4G Other
ON
ON
OFF
OFF
MENU
Exit
Cam PIR
Multi shot
Video resolution
Video Length
Set
OK
Cam PIR
Working timer No 2
OK Set
4G Other
1 photo
HD
10
MENU
Exit
4G Other
OFF
Exit MENU
22/76