Publicidad
Idiomas disponibles
Idiomas disponibles
Cam
PIR
SIM Setup
Manual Setup
MMS
SMTP
FTP
OK
Set
Cam
PIR
Daily Report
SIM PIN
GPS
Set
OK
4G
Settings
SIM Setup
Manual Setup
MMS
PIE1046 - Indice A –Septembre 2020
4G
Other
ON
D
OFF
Exit
MENU
4G
Other
OFF
ON
OFF
Exit
MENU
Programmable options (default settings in bold characters)
Auto setup / Manual setup
The camera will automatically enter the MMS and 4G setups when the SIM card is
inserted.
If "SIM Auto setup failed, enter setups manually" pops up on the screen, please
switch "Auto setup" to "Manual setup" mode, then enter the MMS and 4G setups in
"Manual Setup".
MMS / 4G
Please enter the setups below manually if your local operator can't be automatically
matched by the camera itself.
− MMS
Please contact your operator for MMSC/APN/Proxy/Port (Username and
Password if required) and enter this info manually.
NOTE 1: With MMS setups added, the camera can send photos to the pre-set
phones/e-mails. If the MMS information entered are false, then the phones/e-
mail accounts will not be able to receive photos from the camera.
NOTE 2: Email boxes receive photos from the camera via SMTP only when SMTP
is ON and with the correct SMTP information entered.
NOTE 3: The camera is not able to send pictures to e-mails via MMS when
SMTP is ON.
−
4G
Enter your local operator's 4G APN, and corresponding Username and
Password.
NOTE 1: Only with 4G setups added, can SMTP and FTP functions work.
NOTE 2: It's not a must to enter Username and Password of APN, but some
operators may require this password access to enable the 4G function. For
details, please contact your local operator.
ON / OFF
You can choose to allow photos to be sent to your cell phone via MMS by selecting
"ON".
Cam
PIR
Recipients
Send format
SMTP/FTP photo options
Sendings/day
SMS control
Set
OK
4G
Other
Unlimited
1 time/day
Exit
MENU
24/76
Publicidad
