Publicidad
Idiomas disponibles
Idiomas disponibles
GPS
Cam
PIR
Language
Date/Time
Date format
Time Stamp
Battery type
Set
OK
Cam
PIR
Product information
Set
OK
Other
Settings
Language
Date/Time
PIE1046 - Indice A –Septembre 2020
− Please re-try your PIN code if you see the message "Pls input PIN-Code" again
after the signal search.
− A SIM card is normally limited to be activated 3 times; it will be locked if the
PIN codes entered are all wrong during these 3 attempts. So we suggest you
to double confirm your PIN code before you try again.
− Please insert the SIM card into your phone to unlock it by using its PUK code
after 3 unsuccessful activation attempts.
OFF / ON
With GPS ON, the GPS information will be shown on photo stamp (if the "Time
Stamp" parameter is also set to ON).
NOTE: if the GPS signal is weak around the product, the GPS information will not be
shown on the photo stamp until the signal gets stronger.
4G
Other
En
Au
EU
ON
ALK
Exit
MENU
4G
Other
Exit
MENU
Programmable options (default settings in bold characters)
Français / English / Español / Deutsch / Italiano
Auto / Manual
−
Auto
Time Zone
HH:MM
UTC +/- 00:00
The camera will synchronise the date/time after you enter your time zone
information.
−
Manual
Date
20/03/2020
Manually set date/time.
NOTE: it is important to set the date and time to ensure some functions work as
expected (for example: time stamp on the photos, sending time of the daily report,
operation during defined time periods).
Cam
Frequency
Cycle recording
Password
Reset
Update
OK
Set
Time
15:55:00
PIR
4G
Exit
Other
50Hz
ON
OFF
MENU
27/76
Publicidad
