Publicidad
Idiomas disponibles
Idiomas disponibles
Adjusting the Built-in Clock
Adjust the clock prior to use.
1. Press the SET button until the year starts
blinking.
2. Select the year using the
Press the SET button to set the current year
and move to month/day selection. The date
can be set anywhere between the years 2010
and 2059.
3. Select the month using the
Press the SET button to set the current
month and move to day selection.
4. Select the day using the
Press the SET button to set the current day
and move to hour/minute selection.
5. Select the hour using the
Press the SET button to set the current hour
and move to minute selection.
6. Select the minute using the
(Press the SET button to go to the pressure
setting mode. For details, refer to page 15.)
Press the START button to turn the device off.
Note: After three minutes of non-operation, the device
will turn off automatically.
When the clock has not been
set, the clock display indicates
dashes as shown to the right.
Holding down the
will change the value continuously.
Using the Monitor
or
button.
or
or
button.
or
button.
or
or
button
English 10
button.
button.
Pressing the START
button will turn the
device off anytime.
Press
Year
or
Month
Day
or
Hour
Minute
Turn off
Pressure
setting mode
or
or
or
Publicidad
