Electrolux EW24ID80QS Guía De Uso Y Cuidado página 9

U s e r I n s t r u c t i o n C o d e
Instruction
Problem
Code
Displayed
Close Door This indicates the door has been
left open or not properly latched.
E r r o r C o d e s
Displayed Problem
Error Code*
A low fi ll has been detected.
i10
i20;
Clogged fi lters or a restricted
i40;
drain line has been detected.
iF0
A leak or overfl ow of water
i30
has been detected in the
bottom pan.
A problem has been
i50
detected with the drain or
wash motor.
A problem has been
i60
detected with the water
heating system.
A problem has been
iC0
detected with the electronic
control system.
*In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for 5 min.
does not resolve the problem, contact the Electrolux Customer Care Center at 1-877-435-3287.
Operating Instructions
Solution
Ensuring the door is properly latched will clear
the display. This does not indicate a problem with
your dishwasher and service will not need to be
contacted.
Solution
Look for a pinched water supply line, or water shutoff is
not completely opened.
Check and clean both fi lters and sump area and check
for a pinched or blocked drain hose. If the drain line is
attached to a disposer, check that the knockout plug
has been removed.
Look for loose connections at the water inlet valve and
ensure the unit is properly leveled.
Pressing the cancel button or turning power off at the
breaker for 5 min. should clear this error code and
the unit can be restarted.
If this does not resolve the problem, service
will need to be called.
9