Descargar Imprimir esta página

Dreame Bot L10 Prime Manual De Instrucciones página 8

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
How to Use
EN
Sweeping & Mopping
Note: When using the mop assembly for the first time, the robot will perform
the sweeping and mopping task by default.
1. Start sweeping and mopping
Press the button
on the robot, or use the app to make the robot start from
the base station. Then the robot will plan the optimal cleaning route and
perform the cleaning task based on the created map.
Note:
· The mop pads will be cleaned before the robot starts mopping, please wait
patiently.
· Do not move the base station, the clean water tank, the used water tank, or
the washboard during operation.
2. Return to clean mop pads midway
When mopping, the robot will automatically return to the base station to wash
its mop pads based on the mop pad cleaning frequency specified in the app.
3. Clean the mop pads
After the robot finishes a cleaning task and returns to the base station to
charge, the base station will automatically clean the mop pads.
11
4. Clean the used water tank
After the robot has completed the task, please clean the used water tank to
avoid any odor.
Sweeping
To use only the sweeping function, select "Sweeping" in the app, and the
robot will automatically lift the mop assembly before sweeping. Or you can
remove the mop assembly and then the robot will automatically switch to the
sweeping mode.
Note: To ensure the robot can easily return to the base station , it is
recommended to make the robot start from the base station and avoid
moving the base station during cleaning.
Routine Maintenance
Parts
To keep the robot in good condition, it is recommended to refer to the
following table for routine maintenance.
Replacement
Part
Maintenance Frequency
Period
Used Water Tank
After each use
Dust Bin
As needed
/
Clean Water Tank
Main Brush
Every 6 to 12 months
Once every 2 weeks
Dust Bin Filter
Every 3 to 6 months
Side Brush
Mop Pad
/
Every 1 to 3 months
Note:
·
The replacement frequency will depend on your usage of the robot. If an exception
occurs due to special circumstances, the parts should be replaced.
·
For more information, you can open the Dreamehome App, tap "More Actions" at
the bottom of the device page, and then tap " " > "Help" to learn more details.
(Due to upgrades in the app software, the actual operations may differ from the
directions in this manual.)
Used Water Tank
1. Remove the used water tank, open its cover and pour out the dirty water.
2. Rinse the used water tank with clean water, and use a proper tool to clean
its inner wall.
Note: The float ball in the used water tank is a movable part. Do not apply too
much force when cleaning it to avoid damaging it.
EN
12

Publicidad

loading