Singer 6660 Manual De Instrucciones página 3

15. "Do not use bent needles."
to break."
17. " Switch the sewing machine off ("0") when making any adjustments in the
needle area, such as threading needle, changing needle, threading bobbin, or
changing presser foot, etc."
18. " Always unplug sewing machine from the electrical outlet when removing
covers, lubricating, or when making any other user servicing adjustments
mentioned in the instruction manual."
19. " To avoid electrical shock never put the machine nor the mains cable or mains
plug into water or other liquids."
20. " The LED lamp maximum power is 0.3w, maximum voltage is DC 5v, if the
LED lamp is damaged, you should not use the product and send it to the
manufacture or service agent to repair or replace at once."
21. " Attention the following to avoid injury:
- Unplug the foot controller of the appliance when leaving it unattended:
- Unplug the foot controller of the appliance before carrying out any
maintenance."
"CAUTION-
"SAVE THESE INSTRUCTIONS"
FOOT CONTROL (USA & Canada only)
Use Model YC-485 EC or Model JF-1000 with this sewing machine.
POLARIZED PLUGS CAUTION (USA & Canada only)
This appliance has a polarized plug (one blade wider than the other). To reduce the risk
This appliance complies with EEC Directive 2004/108/EC covering
the electromagnetic compatibility.
Please note that on disposal, this product must be safely recycled in
accordance with relevant National legislation relating to electrical/ electronic
products. If in doubt please contact your retailer for guidance.
Moving parts-To reduce risk of injury, switch off before
-
servicing. Close cover before operating machine."
"This product is for household use, or equivalent."
1