BSV BS POOL PRO200 Manual De Usuario página 47

3.2.5- PRO/2 kit (free chlorine) Optional in PRO equipment
The amperometric measurement kit, allows to obtain a ppm free chlorine
Reading from your swimming pool. This sensor is swimming a 3-electrode
header, which is separated from the water through a membrane. This ppm
measure has a low dependency of pH and isocyanuric acid, and it can be also
installed in sea water swimming pools (this option to be asked to BSV
Electronic). Please follow carefully the installation, calibration and maintenance
instructions to ensure a perfect setup of the kit.
3.2.5.1 – Kit content
The PRO/2 kit is supplied in a panel shape to ease its installation. A complete
description can be read on the manual that is attached with the kit.
3.2.5.2- Technical specification
Measure
Technology
Electronics
Supply
CL measure range
Measure deviation
Operation temperature
Storage temperature
Operation maximum pressure
pH range
Calibration
Maximum time without CL on water
Maintenance period
Manual PRO200-IP65 v1.0
TECHNICAL SPECIFICATION
Free chlorine, low pH dependency
Membrane. Potentiostatic 3-electrode header
Embedded in the probe. 4-20mA output
12 to 30 VDC (10mA)
0.01 to 10.0 ppm
approx. 3% every month
0 to 45ºC
0 to 55ºC
0.5 bar. Water hammer effect must be avoided.
4 to 12
Directly on BSV control panel
24h
Water test: Minimum once a week
Header-membrane change: Once a year
Electrolyte change: Every 3-6 months, depending on the
quality of the water
47 / 66