BSV BS POOL PRO200 Manual De Usuario página 56

4.1.1- Main screen
On starting up the equipment, a screen will be displayed with the main
parameters.
- The upper line shows the production % of each installed power supply
- The second line shows the voltage of each installed power supply
- The third line shows the free chlorine probe value (it can be hidden on
the control menu)
- The line number four shows the unit status and the selected control
mode.
4.1.2- Main menu
Press the "OK" button from the main screen to access the main menu.
Using the buttons   you can select a line of the menu, indicated by the
arrow (→). The OK button is used to confirm the selection.
To access the configuration menu, you need to confirm the operation by
selecting (S) through the arrow, and pressing OK.
4.1.2.1- Configuration
In the configuration menu you can select the configuration parameters, which
usually only have to be adjusted when installing the equipment.
Manual PRO200-IP65 v1.0
56 / 66