Alliance Laundry Systems HC18MD2 Manual Del Usuario página 12

Programming
5. Install or remove jumpers to achieve the desired
cycle time. Figure 3 through Figure 12 illustrate
the possible combinations.
NOTE: Do not remove the cover from the
mechanical timer. Removing this cover will void
the warranty.
No jumpers installed on the board
Removing all the jumpers extends the cycle time,
making it as long as possible. Refer to Figure 3.
5b
3b
1b
Figure 3
1a to 3a
This jumper configuration shortens the wash step from
8 minutes to 4 minutes. Refer to Figure 4.
5b
3b
1b
Figure 4
1a to 3a to 3b
This configuration eliminates the prewash step and
shortens the wash step from 8 minutes to 4 minutes.
Refer to Figure 5.
5b
3b
1b
Figure 5
10
5 5a
3 3a
1 1a
5 5a
3 3a
1 1a
5 5a
3 3a
1 1a
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
1a to 3a to 3b to 5b
This configuration eliminates the prewash step,
shortens the wash step from 8 minutes to 4 minutes,
and shortens the final spin time from 4 minutes to
2 minutes. Refer to Figure 6.
5b
3b
1b
Figure 6
1a to 3a to 5a
This is the factory-preset jumper configuration.
This configuration shortens the prewash step from
4 minutes to 2 minutes and shortens the wash step
from 8 minutes to 4 minutes. Refer to Figure 7.
5b
3b
1b
Figure 7
1a to 3a to 5a to 5b
This configuration shortens the prewash step from
4 minutes to 2 minutes, shortens the wash step from
8 minutes to 4 minutes, and shortens the final spin
time from 4 minutes to 2 minutes. Refer to Figure 8.
5b
3b
1b
Figure 8
5 5a
3 3a
1 1a
5 5a
3 3a
1 1a
5 5a
3 3a
1 1a
F232133