Publicidad
Idiomas disponibles
Idiomas disponibles
English
5 Code Criteria
The Code Criteria feature will detail the conditions required for a DTC to
be set by the vehicle. The vehicle is constantly running self-tests on its
systems. Code Criteria will describe the conditions under which the vehi-
cle can initiate the test. These are called "Enable" criterion. Code Criteria
will also describe the the conditions that will cause a DTC to set. These
are called "Failure" criterion. Code Criteria is not available for every DTC.
Code Criteria is currently only available in English, so if your tool is set to
Spanish or French, don't be alarmed if your DTC text is in one language
and your Code Criteria information is shown in English.
How to use Code Criteria:
1. When the
display, press the
2. Scroll through the Code Criteria
information noting. If a vehicle has
multiple sets of criteria for the DTC,
a menu is displayed, so that the tool
can provide the most accurate crite-
ria for your specific vehicle.
3. Use the
UP or
keys to scroll one line at a time.
4. Use the
LEFT or
keys to scroll a whole screen at a time.
• To return to the DTC definition
screen, press the
Bosch Automotive Service Solutions Inc.
icon is shown on the
key.
DOWN arrow
RIGHT arrow
key.
Quick Start Guide | 9
P2122
Throttle / Pedal Position
Sensor/Switch D Circuit Low
Input
HISTORY CURRENT
MIL
Since last key cycle
Since DTCs erased
Enable Criterion 1
Powertrain control module
detects that commanded state
of driver & actual state of
control circuite to not match
Fault Criterion 1
Barometric pressure > 77
kilopascal.
Fault Criterion 2
DTCS P0100, P0101-03, P0106
1/38
ECM
NOT REQUESTED
PASS/FAIL
PASS/FAIL
575609 Rev A | 02.2015
Publicidad
