Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Remote control Note
mode
AUTO
COOL
DRY
HEAT (only on
some models)
FAN
Under the mode of auto opera-
tion, air conditioner will auto-
matically select Cool or Heat op-
eration according to room tem-
perature.
When FAN is set to AUTO, the air
conditioner automatically adjusts
the fan speed according to room
temperature.
Cooling only units do not have
displays and functions related
with heating.
Useful for decreasing the
excessive humidity of the room
air.
In DRY mode, when room tem-
perature becomes lower than
temp. setting + 2 °C, unit will run
intermittently at LOW speed re-
gardless of FAN setting.
In HEAT mode, warm air will
blow out after a short period of
the time due to cold-draft pre-
vention function.
In FAN operation mode, the unit
will not operate in COOL or HEAT
mode but only in FAN mode.
AUTO is not available in FAN
mode. Temperature setting is dis-
abled. When FAN is set to AUTO,
the air conditioner automatically
adjusts the fan speed according
to room temperature. In FAN
mode, SLEEP operation is not
available.
51
Publicidad
