Publicidad
Idiomas disponibles
Idiomas disponibles
56
timer On/Off operation
1. After unit starts, select the desired operation mode.
2. Press the TIMER ON or TIMER OFF button to change TIMER mode.
When pressing TIMER ON button, the display will show "ON 0.5".
After 10 seconds the time display will be blank.
When pressing TIMER OFF button, the display will show "OFF
0.5". After 10 seconds the time display will be blank.
Then select the desired TIMER mode, (TIMER ON or TIMER OFF or
TIMER ON-OFF). "ON" or "OFF" will flash.
3. Press TIMER ON or TIMER OFF button to set time.
Each time you press the button, the time setting will be increased
by 0.5 hours until reaching 12 hours, then each press will increase
the time by 1 hour.
4. Confirm TIMER setting. After setting the desired time press the
CONFIRM/CANCEL button to CONFIRM your selection "ON" or
"OFF" will stop flashing.
To cancel the TIMER
Press the CONFIRM/CANCEL button again. The set TIME will be de-
leted.
After replacing batteries or a power failure, the time should be re-
set.
According to the time setting sequence of TIMER ON or TIMER OFF,
either Start-Stop or Stop-Start can be achieved.
TURBO and QUIET operation
When you need fast cooling or fast drying, you can select the
TURBO function.
When you will sleep or read then you can select the QUIET function.
Turbo
Mode
F/C
When running TURBO, the fan speed setting will be the highest
When running QUIET, the fan speed setting will be super slow.
Auto
My Temp
ECO
Temp+
Swing
Temp-
Quiet
Health Airflow
Timer On
Sleep
Confirm/Cancel
Timer Off
Lock
Reset
Light
Publicidad
