Bosch VCI Manual Del Usuario página 16

PC WiFi Setup
Step 1. Set up PC communication to VCI
Note:
• Your PC must have internal WiFi capability or an active external WiFi card.
• Your WiFi radio must be enabled on your PC. Many laptop PCs have a software or hardware switch to enable
or disable the WiFi radio to allow use of a PC in a radio sensitive environment such as an airplane. If your WiFi
adapter cannot detect or connect with any other WiFi device in the environment refer to the PC documentation
to identify the specific solution to enable the WiFi radio.
If you are running Windows XP
If you are running Windows
1-a. Click the Start button.
1-b. Do one of the following:
• Click Connect To OR,
• Click Control Panel > double-click Network Connections.
1-c. Right-click on your WiFi adapter.
1-d. Click View Available Wireless Networks.
1-e. If you have your VCI in "Peer to Peer" mode, it will appear as its own network.
1-f. Select the network (in Access Point) or a VCI (in Peer to Peer). Click Connect.
Note: Ask your Information Technology (IT) Administrator for Access Point.
begin your set up with Step 1-a:
®
Vista/7 begin your set up with Step 1-i:
®
16