Bosch VCI Manual Del Usuario página 22

Step 2: VCI Connection Manager
NOTE: The VCI must be connected wirelessly to the PC using Windows
2-a. To open, double-click on the VCI Connection Manager desktop icon
2-b. All available VCI's on the connected network are listed. Highlight the VCI you chose to connect to and click
Connect.
2-c. The selected VCI shows a connected status under its serial number. This VCI can be set to be the default
connection by clicking on Set Default. If it is set to default, an asterisk (*) shows next to it and it becomes the
VCI automatically connected to whenever the connection manager is opened.
Wireless Utility.
®
22
.