SOLAC S9210-A Instrucciones De Uso página 4

(Original instructions)
DESCRIPTION
A Eject button
B Speed selector control
C Turbo button
D Motor body
I Beater
J Dough hooks
If the model of your appliance does not have
•
the accesso ries described above, they can
also be bought separately from the Technical
Assistance Service.
USE AND CARE:
Do not use the appliance if its accessories are
•
Do not use the appliance if the accessories
•
attached to it are defective. Replace them im-
mediately.
Do not use the appliance if the on/off switch
•
does not work.
Do not move the appliance while in use.
•
This appliance is for household use only, not
•
profession al, industrial use.
Store this appliance out of reach of children
•
and/or persons with physical, sensory or redu-
ced mental or lack of experience and knowle-
dge.
Keep the appliance in good condition. Check
•
that the moving parts are not misaligned or
jammed and make sure there are no broken
parts or anomalies that may prevent the
appliance from operating correctly.
Never leave the appliance connected and una-
•
ttended if is not in use. This saves energy and
prolongs the life of the appliance.
Do not use the appliance for more than 5 minu-
•
tes at any one time. Allow to cool for 15 minu-
tes before subsequent use.
•
SERVICE:
Any misuse or failure to follow the instructions
•
for use renders the guarantee and the manu-
facturer's liability null and void.
INSTRUCTIONS FOR USE
BEFORE USE:
Make sure that all products' packaging has
•
been removed.
Before using the product for the first time, clean
•
the parts that will come into contact with food in
the manner described in the cleaning section.
USE (S9210-A MODEL):
Unroll the cable completely before plugging it
•
in.
Place the accessory (I, J) you want to use to
•
motor body accordingly. (Fig.1).
Connect the appliance to the mains.
•
Turn the appliance on, by using the speed se-
•
lector control (B).
From the appliance's five speeds select the
•
one you need. Always start with slow speeds
and increase gradually until you reach the one
you wish to use.
Work with the food you want to process.
•
ELECTRONIC SPEED CONTROL:
The speed of the appliance can be regulated
•
by using the speed selector control (B). This
function is very useful, as it makes it possible
to adapt the speed of the appliance to the type
of work that needs to be done.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE (S9210-A MODEL):
Stop the appliance, selecting position 0 on the
•
speed selector control.
Unplug the appliance from the mains.
•
Clean the appliance.
•
TURBO FUNCTION (C):
This allows you to work using pulses and helps
•
to control the result of the preparation.
Press the turbo button (C). Keep the button
•
pressed down to achieve the desired result.
ES
EN