Publicidad
Idiomas disponibles
Idiomas disponibles
2 temperatures model (OXY2TVD6COUS):
Beverage center compartment (bottom):
•
Press and hold the SET button for a few seconds until the SET temperature (ST1) flashes.
The default temperature setting is 38°F. However, the temperature can be set from 38°F
to 43°F.
•
Set the desired temperature using the
•
Maintain pressure on the SET button for a few seconds. This confirms the temperature
setting of the lower compartment of the cabinet (Beverage center) and allows you to access
the temperature setting (ST2) of the upper compartment (aging compartment).
Aging compartment (top):
•
The default temperature is 54°F. However, the temperature can be set from 50°F to 57°F.
•
Set the desired temperature using the
•
Confirm your setting by pressing the SET button. If you do not confirm by pressing this key,
the change in temperature setting will not take effect.
Your wine cabinet can be placed in a room with a temperature of 54°F – 86°F.
Alarms
In case of significant difference between the temperature inside the cabinet and the temperature setting,
for over 3 hours, the control activates the alarm and the warning light
NB: If you have loaded your cabinet with a large number of bottles, it can take several hours
for your wine cabinet's temperature to stabilise. The warning light
a while then check again. If the alarm warning light does not disappear, contact your retailer.
When commissioning your cabinet, or after significant changes to the temperature setting, it can take
several hours for your wine cabinet to stabilize and display the new desired temperature.
Wait a few days. If the temperature does not stabilise, contact your retailer.
and
buttons.
and
buttons.
appears.
may then appear. Wait
GB
13
Publicidad
